DNS
After looking on Ubuntu forum for an easy step-by-step howto for instaling a DNS server, I decided the best idea would probably be to write this howto myself.... So, here it is!
Step 1: Install Ubuntu dapper, or use your WORKING installation.
Step2: Install bind 9:
sudo apt-get install bind9
Step 3: Configure the main Bind files. Usually, if you install Bind from the source code, you will have to edit the file named.conf. However, Ubuntu provides you with a pre-configured Bind, so we will edit another file:
sudo vi /etc/bind/named.conf.local
This is where we will insert our zones. By the way, a zone is a domain name that is referenced in the DNS server Insert this in the named.conf.local file:
# This is the zone definition. replace example.com with your domain name zone "example.com" { type master; file "/etc/bind/zones/example.com.db"; };
# This is the zone definition for reverse DNS. replace 0.168.192 with your network address in reverse notation - e.g my network address is 192.168.0 zone "0.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };
Ok, now, let's edit the options file:
sudo vi /etc/bind/named.conf.options
We need to modify the forwarder. This is the DNS server to which your own DNS will forward the requests he cannot process.
forwarders { # Replace the address below with the address of your provider's DNS server 123.123.123.123; };
Now, let's add the zone definition files (replace example.com with your domain name:
sudo mkdir /etc/bind/zones sudo vi /etc/bind/zones/example.com.db
The zone definition file is where we will put all the addresses / machine names that our DNS server will know. You can take the following example:
// replace example.com with your domain name. do not forget the . after the domain name! // Also, replace ns1 with the name of your DNS server example.com. IN SOA ns1.example.com. admin.example.com. ( // Do not modify the following lines! 2006081401 28800 3600 604800 38400 )
// Replace the following line as necessary: // ns1 = DNS Server name // mta = mail server name // example.com = domain name example.com. IN NS ns1.example.com. example.com. IN MX 10 mta.example.com.
// Replace the IP address with the right IP addresses. www IN A 192.168.0.2 mta IN A 192.168.0.3 ns1 IN A 192.168.0.1
Now, let's create the reverse DNS zone file:
sudo vi /etc/bind/zones/rev.0.168.192.in-addr.arpa
Copy and paste the following text, modify as needed:
//replace example.com with yoour domain name, ns1 with your DNS server name. // The number before IN PTR example.com is the machine address of the DNS server. in my case, it's 1, as my IP address is 192.168.0.1. @ IN SOA ns1.example.com. admin.example.com. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS ns1.example.com. 1 IN PTR example.com
Ok, now you just need to restart bind:
sudo /etc/init.d/bind9 restart
We can now test the new DNS server... Step 4: Modify the file resolv.conf with the following settings:
sudo vi /etc/resolv.conf
enter the following:
// replace example.com with your domain name, and 192.168.0.1 with the address of your new DNS server. search example.com nameserver 192.168.0.1
Now, test your DNS:
dig example.com
Look at the result.... Enjoy!
Also, this post is not perfect... Do not hesitate to improve it!
http://ubuntuforums.org/showthread.php?t=236093
ещё статьи: http://www.linuxcenter.ru/lib/articles/networking/bind9_dnscache.phtml
Патч для уязвимости DoS через запросы подтверждения DNSSEC в ISC BIND
http://safe.cnews.ru/bugtrack/entry/index.shtml?patch/2007/06/19/100467